D-link PowerLine Hard Reset

Geschrieben von: alan
  • Kommentare: 0
D-link PowerLine Hard Reset

Schwierigkeitsgrad

Very easy

Schritte

2

Zeitaufwand

1 Minute

Einleitung

I phoned D-Link tech support several times, and they eventually concluded my device was broken, but I got it fixed.

My D-Link dhp w306av would do nothing but blink it's blue (WPS/ENY) LED. None of the support people could fix it with any kind of reset. This is what I managed to do.

Werkzeuge

  1. IsaYvTRlUkcREkib

    • (With router unpluged, and no ethernet cable attched) Turn the router on (push in the power button on the side) remember it's not plugged into the wall yet.

  2. FYjPDkxcHnjJPowN

    • Take a pin or micro screwdriver and push in and hold the reset button.

    • Still holding the reset button plug the router into a power outlet.

    • Keep holding down the reset button for at least 15 seconds.

    • If you have the same luck I did your green lights on the side will start to cycle and light up.

    • Now you can go back to your quick install guide that came with the router and set it up again.

Abschluss

hope it works for you

Tinte & Feder

alan

Mitglied seit: 24/08/13

1 Reputation

0 Kommentare