Einleitung
Werkzeuge
- 
                  
                  - 
            Make sure the laptop lid is closed, turn it over and remove the battery by moving the switch right to left. 
- 
            there are three philips screws located on the surface where the writing is. remove those three screws. 
 
- 
            
- 
                  
                  - 
            turn the laptop right side up. Between the cover and case on the top right of the laptop and using a plastic sludger or a finger lift gently on the speaker cover as to disengage the clips. 
- 
            Be sure not to pull hard or you may damage the ribbon cables. 
- 
            From the side closest to the screen turn the cover towards yourself. 
 
- 
            
- 
                  
                  - 
            there is one connector from the speaker bar to a control board. Gently remove the cable. 
- 
            There are two more screws attaching the speaker bar to the cover, remove these and take the speaker bar out. 
 
- 
            
- 
                  
                  - 
            you are now ready to replace or repair the speaker bar. I recomend purchasing a new one, they range anywhere from 5-15 dollars online. 
 
- 
            
To reassemble your device, follow these instructions in reverse order.
2 Kommentare
how to fix speaker from board
Grazie siete bravissimi . Ce ne fossero persone come voi che altruisticamente mettono a disposizione la loro esperienza di riparazioni per gli altri!
Fernando Mancini