Einleitung
Werkzeuge
- 
                  
                  - 
            Power down the device and disconnect the power cable. 
- 
            Remove the ten screws from the back panel using a T5 Torx screwdriver. 
 
- 
            
- 
                  
                  - 
            Use an iFixit opening tool to detach the clips on the top side of the back panel. 
- 
            After unclipping the top part of the panel, use your hands to gently unclip the rest of the panel. 
- 
            Remove the back panel from the laptop. 
 
- 
            
- 
                  
                  - 
            Remove the five screws from the battery using a Phillips #00 screwdriver. 
- 
            Use your hands to remove the battery from the laptop. 
 
- 
            
- 
                  
                  - 
            Use a pair of tweezers to lift the clip securing the touchpad cable. 
- 
            Disconnect the touchpad cable from the motherboard. 
 
- 
            
                            
                            Abschluss
                          
                          To reassemble your device, follow these instructions in reverse order.