Einleitung
Werkzeuge
- 
                  
                  - 
            Pry your metal spudger between the upper cap en the silver lower panel. 
- 
            Unlatch the four notches. 
- 
            Lift the cap out of the top end. 
 
- 
            
- 
                  
                  - 
            Remove the indicated screw. 
- 
            Pry between the body and the lower panel to spring loose the two latches on the sides. 
- 
            Lift the panel out of the third latch. 
 
- 
            
- 
                  
                  - 
            Remove single screw at the bottom. 
- 
            Remove the screws under the lower panel. 
- 
            Gently pry the main body off, by moving the metal spudger from the bottom, where it easily gets between the two parts, to the side. 
- 
            When the spudger reaches the notches, click it open. 
 
- 
            
- 
                  
                  - 
            This is as far as I went, since I opened it only for cleaning purposes. 
- 
            All components are visible, but there is an extra layer of teardown possible. 
 
-