Einleitung
Internal Prereq.
Werkzeuge
- 
                  
                  - 
            Löse und entferne das Stück Tape, das den ZIF Stecker des SIM Platinenkabels bedeckt. 
- 
            Klappe die Haltelasche des ZIF Steckers um. 
- 
            Ziehe das SIM Platinenkabel mit einer Spudgerspitze gerade aus seiner Fassung auf dem Logic Board. 
 
- 
            
I found it easier to remove the 7 screws first in step 42 then gently pull the logic board towards you freeing the SIM board cable.
Rich1981 -
This cable is really fragile, I found it easier to flip the retaining flap then remove all 7 screws in step 42 then gently pull the logic board toward you freeing the SIM board cable.
Rich1981 -
For me, it was impossible to accomplish this step without first removing the 7 screws from the Logic Board and disconnecting the Logic Board connectors (Wi-Fi, Speaker, Dock/Lightning) at the bottom. Then, I could slide the Logic Board downward just enough to pull free the SIM cable. When reassembling, I attached the 3 antenna connectors first, then the SIM cable, before installing the 7 screws and Logic Board connectors (Wi-Fi, Speaker, Dock/Lightning) at the bottom. Went a bit easier.
robk64 -
Thanks for your advice! Definitely best doing it during step 43!
coccia.stefano -